In nearly all situations, most people spend quite a lot of money buying their forklift. Hence, it is really essential to take proper care of it so as to protect your investment well into the long run. It is a great idea to know the procedures that are undertaken in maintaining and taking care of this machinery.
Amongst the best ways to tell how good the engine is working is by starting the lift truck up and listening closely to see how it works. Like for instance, if there are any knocks or misses, the machine is defective and this must raise some issues. Also listen carefully for any squealing noise which come from the belts as these noises would provide you with a lot of information.
Several of the main parts needing attention during maintenance consist of the safety warning devices, gauges, horn, the overhead guard and the lights. Any faulty components or burnt out light bulbs need to be replaced as soon as they are noticed. It is also essential to check the wiring.
The battery compartment terminals should be cleaned after the above parts have been inspected thoroughly. If the terminals are not clean, be sure to clean them well. Each and every cell of the battery should be checked so as to make certain that the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machine and then change the filters. The transmission filter, fuel filters and the hydraulic filter should be frequently replaced. Before fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
When the oil change is carried out and the filters have been replaced, a visual inspection of the drive axle needs to be performed. If there is a grease fitting on the axle make certain to apply some grease. Inspect the belts on the engine for any cracks or frays. If you find any, fix the issue accordingly. Then, check each and every other part of the equipment including the wheels. If any kind of problem or fault is detected, be sure to deal with it immediately so as to make certain the machine is running at its safest and optimum levels.