Utilize a Pneumatic Forklift
You could normally find pneumatic forklifts in warehouses and shipping operations. Also called pallet trucks or pump trucks, they are utilized in order to transport supplies and things around on wooden pallets utilizing metal forks that are mounted on a wheeled counterweight. The counterweight contains a pump which could lift the forks off the ground. A pallet truck is designed to be operated by one individual.
To avoid loosing control while raising heavy loads, pallet trucks should always be operated carefully. Machine must be inspected prior to operating. Clear the wheels area of any obstructions. Make certain that the handle turns smoothly. The pallet must be stacked carefully to be able to ensure that nothing would fall off during transportation.
To release air in the pump and lower the forks, squeeze the lever located on the inside of the metal loop on the end of the pallet truck's handle. The forks could then be pushed into the slots of the pallet. The forks should be at the center in order to ensure even distribution of the pallet's weight across them. Lift the forks from the ground by pumping the pneumatic lift's handle until the pallet has cleared the ground completely. Do not raise the pallet very high or the forklift can unbalance.
Move the pallet by pulling on the handle and dragging it behind you. It is not safe to push the pallet ahead of you because the thrust can cause it to lose control. Take turns slowly and don't try to stop suddenly. Gradually come to a stop, squeeze the lever, and the forks would lower to the ground. Lastly, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent place.